Route66 – Fiber Patchbay



Media Conversion


Up to 40x40 independent fiber I/O


Route66 – Fiber Patchbay

Click here for rear view »


  • Up to 40 bi-directional SFP slots
  • Each SFP supports bandwidth up to 4G
  • Protocol transparent and independent
  • Fiber patching controlled from software
  • 4 x LAN
  • No fan
  • Dual redundant PSU
  • 2RU chassis

Overview Route66 – Fiber Patchbay

Route66 Fiber Patchbay is perfect solution for studio infrastructure or advanced OB Vans. It is a standalone protocol independent fiber router – can be used to route open as well as proprietary protocols like SMPTE-311m (camera – CCU fiber link), Studer A-Link, Calrec Hydra, Yamaha TwinLANe, Gigabit Ethernet etc. All of those mentioned streams can be freely routed in the Optocore Control software, external hardware or 3rd party software control. Single Route66 can work with multiple different protocols at the same time.

Route66 replaces manual fiber patchbay and necessity to patch cables manually every time the production changes – with Route66 single operator can do all patching from the remote location via LAN.

Application Drawing: Route66 – Fiber Patchbay

Technical Specifications Route66 – Fiber Patchbay

Optical Connection Complies with 21 CFR 1040.10 and 1040.11  
Connection LC    
Data rate Dependent on the Protocol data rate – up to 4GBit
SANE, LAN ports Convention    
Audio TIA – 568A/B, Optocore   200 Mbit/s
LAN TIA – 568A/B, IEEE – 802.3   10/100 Mbit/s
Remote Control      
RS232 EIA / TIA – 232 57 600 Baud  
USB USB 2.0 – Device 12 Mbit/s  
LAN IEEE – 802.3 10/100 Mbit/s  
Power Supply      
Type Switch-mode, universal input    
Mains voltage 100… 240 V 50    60 Hz  
Frequency 50    60 Hz    
Cooling Passive, via surface and ventilation openings on both sides of the device
Dimensions 2 RU / 19”    
W x H x D 19.0 x 1.73 x 7.87 inch    
Weight Dependent on configuration    

Documents Route66 – Fiber Patchbay


Odering Options Route66 – Fiber Patchbay

Coming soon